Old 04-22-2011, 05:10 PM   #1
daveedmo
Member
 
daveedmo's Avatar
 
Join Date: Apr 2009
Posts: 79
Default Worth appealing?

The second one especially I feel should be in. It's not squint (look at the pantograph - the river goes over a waterfall at an angle), and any more sharpening would result in staircasing on the pantog wires.

http://www.railpictures.net/viewreje...d=924507&key=0
Bad Cropping: Most often this means that the composition of the photo is poor as it relates the cropping of the image.

http://www.railpictures.net/viewreje...d=924508&key=0
Horizon Unlevel: Try leveling the image in your photo editing software.
Undersharpened (Soft)
daveedmo is offline   Reply With Quote
Old 04-22-2011, 05:25 PM   #2
JRMDC
Senior Member
 
JRMDC's Avatar
 
Join Date: Nov 2006
Posts: 11,202
Default

Re the first, always tricky to crop catenary. I don't much care for that piece of catenary structure in the upper left corner, and in general the top is too tight, given what is there. A little looser on the left would also help.
__________________
My RP pix are here.
My Flickr pix are here.

My commentaries on rail pictures are in my blog.

RP Photo Albums:
Cabooses
Engine Details
Farm and Train
Plumes!
Railroad Details
Signal Details
Switchstand Shots
JRMDC is offline   Reply With Quote
Old 04-22-2011, 05:46 PM   #3
magicman_841
Senior Member
 
magicman_841's Avatar
 
Join Date: Nov 2010
Location: Montreal, QC
Posts: 1,024
Default

I pretty sure the second will get in once you rotate and sharpen it. Think it needs to turn CCW a little. And it is somewhat soft. But a great picture! Keep going at it!
__________________
Mathieu Tremblay
Choo photos
magicman_841 is offline   Reply With Quote
Old 04-22-2011, 06:03 PM   #4
daveedmo
Member
 
daveedmo's Avatar
 
Join Date: Apr 2009
Posts: 79
Default

Quote:
Originally Posted by magicman_841 View Post
I pretty sure the second will get in once you rotate and sharpen it. Think it needs to turn CCW a little.
That's my point - it's *not* squint. Use your mouse pointer arrow (if you're using windows) to test the vertical - the pantograph masts, the railings, the bridge supports, even the windows on the side of the engine. The weir on the river is not level; it's at an angle. Does no-one agree?
daveedmo is offline   Reply With Quote
Old 04-22-2011, 06:39 PM   #5
stevenmwelch
Senior Member
 
stevenmwelch's Avatar
 
Join Date: Feb 2008
Location: Minot, ND
Posts: 720
Send a message via AIM to stevenmwelch Send a message via Yahoo to stevenmwelch
Default

Quote:
Originally Posted by daveedmo View Post
That's my point - it's *not* squint. Use your mouse pointer arrow (if you're using windows) to test the vertical - the pantograph masts, the railings, the bridge supports, even the windows on the side of the engine. The weir on the river is not level; it's at an angle. Does no-one agree?
Its unlevel. Not sure what you're seeing but its about .4 degrees off.
__________________
Steven M. Welch
Minot, ND
I gots my floaties and I'm ready to go railroadin' in Minot.
My Photos on RP
My RP Rejects and then Some
stevenmwelch is offline   Reply With Quote
Old 04-22-2011, 07:40 PM   #6
Wizzo
Senior Member
 
Wizzo's Avatar
 
Join Date: Jun 2007
Location: Oxford, UK
Posts: 545
Default

Quote:
Originally Posted by stevenmwelch View Post
Its unlevel. Not sure what you're seeing but its about .4 degrees off.
Make the viewing window smaller and then slide the catenery support over to the edge of the window - it aligns perfectly - the shot is level, but the angled weir gives the illusion its off.

However, whether you will get it past the screeners..........
__________________
STEVE

Press here to see my pics on railpictures.net

More pics here D1059 on Flickr
Wizzo is offline   Reply With Quote
Old 04-22-2011, 07:52 PM   #7
stlgevo51
Senior Member
 
stlgevo51's Avatar
 
Join Date: Jun 2009
Location: St. Louis
Posts: 759
Default

Quote:
Originally Posted by Wizzo View Post
Make the viewing window smaller and then slide the catenery support over to the edge of the window - it aligns perfectly - the shot is level, but the angled weir gives the illusion its off.

However, whether you will get it past the screeners..........
Funny, I zoomed in on the shot, and the catenery pole and bridge supports were definitely not level next to the side of the page. I can even tell, and I suck at leveling. It still could get on, just sharpen it and level it.
__________________
Jake
Railpictures Shots RP stuff.
Flickr Shots All the RP stuff plus some failed experiments, wedgies, and junk.
Youtube Videos
stlgevo51 is offline   Reply With Quote
Old 04-22-2011, 07:43 PM   #8
troy12n
Banned
 
Join Date: Jun 2008
Location: Tampa, FL
Posts: 5,333
Default

The first one is overexposed and/or lacks contrast/color depth.
troy12n is offline   Reply With Quote
Old 04-25-2011, 11:40 AM   #9
andy buckley
Member
 
andy buckley's Avatar
 
Join Date: Nov 2006
Location: Bedfordshire, UK
Posts: 72
Default

In the spirit of learning from those that seem to know, I thought I'd try what J suggested - so copied into PSP and ccw'd .4 degrees - and it does actually make a positive difference! Subtle but it's there.

btw, @Wizzo, the catenary poles may line up as parallel to a screen edge, but in my experience this is not necessarily a good gauge as the poles I've seen (and I live a few yards from the ECML) tend to lean outwards - I presume on purpose?

Try ligning up with the bridge supports and you'll see what I mean. I am of course assuming that they are vertical and not tapered....

Andy
andy buckley is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT. The time now is 04:26 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.