View Single Post
Old 06-24-2008, 06:23 PM   #2
millerm
Member
 
Join Date: Apr 2008
Posts: 63
Default

I can't help you with the name of the road or an exact frequency but I can tell you how I find out what frequency if I don't know.

It's somewhat trial-and-error but has worked well. First, set you scanner to search all of the AAR channels (if you don't know them it's easy to find on Google) and just listen to them for a bit. You may even find a listing sorted by railroad if you're lucky.

>If it's not near a yard -- just a main line passing through:
Adjust your squelch so you have the shortest range possible and just wait. You'll very quickly notice a trend that every time a train goes by there's traffic on one or two channels and it's always the same channel(s). That's it.

>If it's near a yard or other busy area:
Again, adjust your squelch so you have the shortest range possible. If you still pick up lots of stuff on all the channels you may want to pick up a shorter "Race-Scanner" type antenna that's designed for shorter range. If you're lucky there will be a signal or road name that they read off as they pass it (something like "Clear Broadway Signal" or "Approaching Hamiltonís Crossing"). Maybe a station along that route that you can listen for them stopping at too.

Once you know the channel(s) just readjust the squelch so you have maximum coverage and enjoy. I also got a ham-radio type antenna so I can put the antenna on top of my car when I'm out railfanning, it's not necessary but can help you pull in the traffic farther away.

Good luck!
millerm is offline   Reply With Quote